The truth be told, in many exterior home applications, it has already lasted for 30 to 50 plus years. T1-11 isn’t without its share of both, however, if it is properly maintained – like most anything – it will last for years. Like any siding or product, there are pros and cons to consider. Once fused together, both types of panels are trimmed to size, and the grooves cut before being sanded. OSB is made of wood strands soaked in resin glue and arranged in alternating layers which are then heated and pressed to fuse them into a panel or sheet of wood. The plywood is made of thin layers of veneer glued together under high pressure and heat to fuse the layers. The panels come in 3/8”, 5/8”, and 3/4” thicknesses of plywood or OSB (Oriented Strand Board). The grooves are typically 4” or 8” apart and cut into the outer wood layers. The textured side may be sanded smooth with the grooves or roughly textured with grooves for a more rustic look and feel. T1-11 siding is structural 4×8 or 4×10 exterior wood panels that have one side textured with grooves or channels, hence T1. T-1 continues to be used and is available at most wood stores and home centers. Although T1-11 is rated for 20-years, it’s still going strong on many of the early structures it was used on. It was the go-to choice for home siding into the 80s until it was displaced by vinyl siding and other composite options. T1-11 siding is an engineered all-wood panel that has been around since the 1960s. Can You Install T1-11 Panels Horizontally?.How Do You Install T1-11 Plywood Siding on a Shed?.Is It Better to Screw or Nail T1-11 Panels?.Do You Need Plywood Under T1-11 Siding?.Additionally, we look at whether T1-11 panels can be installed horizontally, the cost of T1-11 siding, some problems you might encounter, and some alternatives to consider. We also discuss the type of fasteners to use, what pattern, and where, plus a step-by-step guide for installation. In this guide, we explain what T1-11 siding is, some pros and cons, and whether it should be installed over Tyvek or plywood. Use a router or saw to cut openings, and finish it with a good quality stain or paint. Fasten the T1-11 siding to the studs with galvanized nails or exterior grade screws. framing and cut window and door openings with a utility knife. Wrap and staple Type-1 tar paper or house wrap to 16” o.c. It looks like board and batten siding, so provides the outside finish, plus it saves on the sheathing cost in both materials and labor since it is sheathing as well. If you’re building a home, cottage, cabin, shed, garage, or other structure, consider T1-11 siding installation. The costs of building materials continue to rise and environmental concerns make some products less desirable.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |